By application

Immersion temperature probe – STI

This type of sensor is ideally suited for oil measurements, such as engine oil or other fluids within the limits of the RTD type sensing element. This model meets the requirements of MILSTD-810F. Its fast response time and good accuracy make it an ideal sensor for accurate measurements in harsh environments. A transmitter with an analog output (voltage or current) is integrated inside the body. The 316L stainless steel body and the laser welding between the body and the connector ensure an unma...

Atmosphere temperature probe- STA

This model of temperature sensor exists in PT100 platinum probe version or in thermocouple version. It is ideal for ambient temperature measurements. This range of sensors is equipped with a shielded Teflon extension cable and a support plate for fixing...

ICP single-axis accelerometer – Serie CMCP1100

The CMCP1100 100 mV/g accelerometer with integral 5, 10 or 20 meter cable is manufactured to high quality standards. Each accelerometer is sealed in a waterproof stainless steel case....

Position rotating sensor – Serie PS

PS-range sensors are designed to measure angle displacements over 340° to 350°. They can make different revolutions at the maximal rotating speed of 600 rev/min. They include a potentiometric plastic track.

• Separate linearity: ± 0,05% (standard is ± 0,5%).
• Infinite resolution.
• Repeatability: 0.01 of the CET.
• Rotating speed up to
• Lifespan > 100x106 operations at 10 rev/s.
• Protection class: IP 40.

1/2/3-axis inclinometer – Serie ME26400 BOX - Serie ME26400 BOX

• Measurement of angle on 1/2/3 axes.
• Measurement range: ± 10, 30, 70, 80, 360°.
• Cast aluminium housing. Protection class: IP65.
• Analog output: 4-20 mA, 0-5 V, ± 5 V.
• •Zero and gain adjustable through potentiometers.

Potentiometric and magneto resistive displacement sensor – PY2

PY2-range sensors are designed to measure linear displacements from 0-10 mm to 100 mm. Three measurement ranges are available, all with a linearity ranging from 0.2 to 0.1%.
They feature a contact tip and a return spring and they include a potentiometric plastic track.

• Separate linearity up to ± 0,1%.
• Infinite resolution.
• Lifespan > 100x106 operations.
• Displacement speed up to 10 m/s.
• Protection class: IP40.

Potentiometric and magneto resistive displacement sensor- Serie PY3

PY3-range sensors are designed to measure linear displacements from 0-10 mm to 100 mm, with a linearity ranging from 0.3% to 0.1%. They feature a contact caster and a return spring and they include a single plastic track.

• Separate linearity up to ± 0,1%.
• Infinite resolution.
• Lifespan > 100x106 operations.
• Displacement speed up to 10 m/s.

Potentiometric and magneto resistive displacement sensor – Série LT

LT-range sensors are designed to measure linear displacements from 0-50 mm to 900 mm. Different measurement ranges are available, with a linearity ranging from 0.1% to 0.05%

• They include a potentiometric plastic track.
• Separate linearity up to 0.05%.
• Infinite resolution.
• Repeatability: 0,01 mm.
• Displacement speed up to 5 m/s (optional: 10 m/s).
• Lifespan > 100x106 operations.

Rotating torque meter – Serie CR5

The 4502A series torque transducer consists of a test body equipped with strain gauges and mounted in a free rotating housing with integrated connectors. A rotating collector ensures the transmission of the signal between the test body and the housing.

• Different geometries (type H, Q, R, RAU)
• Angle measurement (option A)
• Accuracy 0.2% EM
• Measurement ranges ±0.5 to ±1000Nm...

Miniature sensor – Serie F5930-F5932

Sealed and compact tension and compression sensors.

Material:

• 5930: stainless steel
• 5932: anodised aluminium alloy

• 5930: 200 – 300 – 500 N
• 5932: 1 – (1.5) – 2 – (3) – 5 kN

Incremental Encoders – ROD436

ROD 436 encoders are designed to measure angle displacements of rotating speeds.

• Two 90°-offset incremental encoders to perform the counting of both Ua1 and Ua2 angles.
• 1 Ua0 top zero.
• 1 UaS perturbation signal.
• As standard, they propose from 50 to 10,000 lines per revolution.

Force ring – F5900

Annular force transducers specially designed for applications requiring a load measurement through a centred.
Material: stainless steel
Protection class: IP67

Capacities:

• 5900 Force: 3 – 5 – (7.5) – 10 – (15) – 20 – 30 - 50 – 75 – 100 – 150 – (200) kN
• 5900 HOIST: 0.2 – 0.5 – (0.75) – 1 – (1.5) – 2 – 3 – 5 – 7.5 – 10 – 15 t...

Rotating torque meter – Serie CR1

The 4501A series torque transducer consists of a test body equipped with strain gauges and mounted free to rotate in a housing integrating the connectic. A rotating collector ensures the transmission of the signal between the test body and the housing.

• EM FROM ± 0.5 TO ± 1000Nm
• Accuracy 0.2%EM
• Angle measure (Option A)
• Different geometries (type H, Q, R)...

Static torque meter – Serie CS3

Universal non-rotating torque meters combining accuracy and sturdiness.

• Easy to install, compact design
• Protection class: iP65
• Materialstainless steel (61000), nickel-plated steel (6105)
• Cable length: 3m...

Cable displacement sensor – Serie CD 50

A linear CD50 works according to the principle of a thread taut between a mobile element and a fixed element, fitted with a return spring drum. The drum then converts the linear displacement into an angle displacement. The shaft of the drum is fitted with a potentiometer, and operates an incremental encoder or an absolute encoder....

Force ring – Serie F5180-F5182

Compression washer annular load cells specially designed for force measurement on bolts.

Material:

• stainless steel body (5180)
• aluminium (5182)

• 5180: 50 – 75 – (100) – 150 – 200 – 300 – 500 – 750 kN
• 5182: 20 - 30 kN
...

Miniature sensor – Serie F5960-F5962

Sealed and compact compression sensors.

Material:

• 5960: Stainless steel
• 5962: anodised aluminium alloy

• 5960: 200 – 300 – 500 N
• 5962: (0.75) – 1 – (1.5) – 2 – (3) – 5 – (7.5) – 10 – (15) – 20 kN

Miniature sensor – Serie F5910

Load cell combining high capacity with low design.

Material:

• 5910: stainless steel
  Protection class: IP67
  Capacities:
  
  • 5910: (0.3) – 0.5 – (0.75) – 1 – (1.5) – 2 – 3 – 5 t...

ME2657 - High accuracy programmable attenuator with analog and USB outputs (table set)

MEIRI 2657-ATT90 USB box offers analog electronics allowing to attenuate voltage signals until -90dB, with a ±0.1dB accuracy.
Attenuated signal input and output are made thought BNC connectors.
Programming attenuation is set up from the front panel or from a USB plug.
A dashboard on the PC screen enables to set up the attenuator. It can also be programmed by a DLL included with the equipment. Standard model “A” is supplied by mains, version “B” is supplied by rechargeabl...

ME52C - Analog signal converter Rail DIN

The ME52C converts and amplifies signals originating from all types of electronic devices or sensor to deliver a standardized analog output (±10V, 4-20mA, etc.).

The ME52C is a modular analog signal converter for installation on a DIN rail. It is chiefly designed for the adaptation of signals in order to deliver an analog output which can be used by an acquisition system or a programmable controller.

It can also be used as a voltage or current amplifier, an impedance adaptor ...

2680C - Multichannel multifunction measuring unit

2680C measuring unit is able to condition from 4 to 16 sensors, with totally different sensor on each channel.
2680 control unit allows to set up acquisition channels configurations as gain, zero, offset… by sending digital commands handled through the control panel; or be set up with USB connection through a remote PC to acquire direct data and exploit them into Microsoft Excel for instance (.csv files)...

ME520 - Converter of signals and conditioner of analog sensors for strain gauges, DIN rail format.

The single channel measurement model ME520 provides very complete analog outputs for measurement, conditioning and conversion of signals such as strength, torque, pressure, displacement, acceleration sensors or strain gauges.
Three parameters can be adjusted with an easy procedure that allows output trimming depending on the sensor:

• A potentiometer to trim gain
• A potentiometer to trim zero
• A push button to trim calibration

Soon in 2021: 2655D – Dual Sensor Conditioner

Soon in 2021 2655D - Dual Sensor Conditoner In order to get more information you can contact us by mail : contact@spherel.fr...